Chlorate in Drinking Water: Complete Guide (2026)

By Echo Water Research Team 6 min read
Chlorate in Drinking Water: Complete Guide (2026)

Chlorate in Drinking Water

Found in 5,585 water systems • disinfection_byproducts

Updated September 2026 • Data from EWG & EPA

5,585
Water Systems Affected
1,412
Above EWG Guideline
219,393,271
People Affected

What is Chlorate and Why Does It Matter?

CHLORATE: WHAT YOU NEED TO KNOW ABOUT THIS WIDESPREAD WATER CONTAMINANT

What Is Chlorate and How Does It Get Into Your Water?

Chlorate (ClO3-) is a chemical compound that enters drinking water primarily through water treatment itself. When water utilities use chlorine dioxide to disinfect water and remove harmful bacteria, chlorate forms as a byproduct. It can also come from industrial sources, bleach manufacturing facilities, and agricultural runoff. Once in the water supply, chlorate persists because it's highly soluble—it doesn't settle out or evaporate easily. This means once it's there, it stays there until removed by specific filtration methods.

The scale of chlorate contamination is substantial. Our analysis found chlorate in 5,585 water systems across the United States, with 1,412 systems (25%) exceeding health guidelines. The average concentration detected is 160.7 ppb (parts per billion), though some systems measured as high as 2,530 ppb—more than 15 times higher than safe levels.

Health Effects: What the Research Shows

Chlorate exposure primarily affects the thyroid gland. The thyroid regulates metabolism and is especially important for children's development. According to the Environmental Working Group (EWG), chlorate can interfere with iodine uptake in the thyroid, potentially disrupting thyroid function even at relatively low exposure levels.

The EPA currently allows up to 1,000 ppb of chlorate in drinking water. However, the EWG health guideline is significantly stricter at 100 ppb—a tenfold difference. This gap exists because the EPA's standard was set decades ago and hasn't been updated to reflect newer research on thyroid effects. At levels above the EWG guideline, regular exposure poses a measurable risk to thyroid health, particularly for pregnant women, infants, and young children whose thyroid development is still ongoing.

Most people exposed to chlorate at typical levels won't experience immediate symptoms. The concern is long-term exposure: repeated consumption of chlorate-contaminated water over months or years may subtly affect thyroid function. Families with young children or pregnant members should take this contaminant seriously.

The Regulatory Gap

This is where things get complicated. The EPA's 1,000 ppb standard is the legal limit, but it's outdated. The EWG's 100 ppb recommendation reflects current science better. Of the 1,412 water systems exceeding guidelines in our analysis, many are technically "compliant" with EPA rules but exceed the more protective EWG standard.

Your water utility must tell you if chlorate exceeds the EPA limit—that's the law. But they're not required to report levels between 100 ppb and 1,000 ppb. This means you could be consuming chlorate above what independent health experts consider safe, and you might not know it. Request your water quality report from your local utility, or check it online through your utility's website.

Geographic Hotspots: Where Chlorate Is Most Common

Chlorate contamination concentrates in five states: Texas (548 affected systems), California (524), North Carolina (320), Florida (286), and New York (242). These states don't share a single geographic feature—they're spread across different regions and climates. The common thread is that they all use chlorine dioxide extensively for water treatment, particularly in larger municipal systems.

Texas and California's high numbers reflect their large populations and numerous water systems. However, the concentration is also higher in states with older water infrastructure where chlorate byproducts have accumulated over decades of treatment.

How to Remove Chlorate From Your Water

Standard carbon filters won't remove chlorate effectively. You need either reverse osmosis or ion exchange systems. Reverse osmosis forces water through a membrane so fine that chlorate molecules can't pass through, removing up to 99% of chlorate along with other contaminants. Ion exchange systems use specially treated resin to swap chlorate ions for harmless ones.

If your water tests above 100 ppb for chlorate, a point-of-use reverse osmosis system under your sink provides reliable protection for drinking and cooking water. For whole-home protection, a reverse osmosis system combined with ion exchange offers the most thorough solution. Test your water first—many utilities provide free testing, or you can use a certified lab—so you know exactly what you're dealing with.

Regulatory Standards for Chlorate

Standard Level Notes
EWG Health Guideline 210 ppb Stricter, based on latest science
Average Detected Level 160.68 ppb Across all tested systems
Highest Detected Level 2,530 ppb Worst-case system

Cities With the Highest Chlorate Levels

# City Detected Level People Served
1 Ormond Beach, FL 2,530 ppb 5,662
2 Bonham, TX 2,031.90 ppb 10,386
3 Montague, TX 1,867.50 ppb 212
4 Orange City, FL 1,735 ppb 19,672
5 Savage, MN 1,687.70 ppb 30,285
6 Peru, IL 1,432.90 ppb 0
7 Willingbor0, NJ 1,379 ppb 35,000
8 Pennsville, NJ 1,316.40 ppb 13,500
9 Middleton, MA 1,244.50 ppb 6,920
10 Middleton, MA 1,244.50 ppb 26,493
11 Garden City, MO 1,211.40 ppb 1,590
12 Madill, OK 1,161.60 ppb 17,587
13 Madill, OK 1,161.60 ppb 212
14 Houma, LA 1,103.80 ppb 11,148
15 Pflugerville, TX 1,096.50 ppb 1,845

Concerned about Chlorate?

Check if your water is affected with a free personalized report.

Check Your Water

How to Remove Chlorate From Your Water

Chlorate is an ionic compound that is NOT effectively removed by activated carbon filtration; it requires ion exchange or reverse osmosis to reduce to safe levels.

Standard pitcher filters and carbon-only filters do not reliably remove Chlorate. A reverse osmosis system with NSF/ANSI 58 certification is the most reliable solution.

Only ion exchange resins or reverse osmosis membranes effectively remove chlorate; activated carbon provides minimal reduction and should not be relied upon for chlorate removal.

Echo RO System

Removes Chlorate and 99.9% of other contaminants. The gold standard for drinking water purification.

View RO Systems

Echo Hydrogen Water Flask

Once your water is clean, supercharge it with molecular hydrogen for antioxidant benefits.

Shop Hydrogen Flask

Frequently Asked Questions

Is Chlorate in my drinking water?

Chlorate was detected in 5585 water systems across the US. Check your city's water quality report to see if it affects your water supply.

What are the health effects of Chlorate in water?

Chlorate has been associated with various health concerns at elevated levels. The EWG has set health guidelines that are typically stricter than EPA legal limits.

Which city has the most Chlorate in its water?

Based on our analysis, Ormond Beach, FL has the highest detected levels of Chlorate in its water supply.

How do I remove Chlorate from my water?

Reverse osmosis (RO) systems are generally the most effective at removing this contaminant. Check the filtration recommendations section for specific guidance.

Data sources: Environmental Working Group (EWG) Tap Water Database, U.S. EPA Safe Drinking Water Information System (SDWIS)

Last updated: September 2026

Methodology: Contaminant levels are compared against both EPA legal limits (Maximum Contaminant Levels) and EWG health guidelines, which are often stricter and based on the latest scientific research.

Share
Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.