Hydrogen Water Bottles
A hydrogen water bottle makes hydrogen water on the go: fill it, start a cycle, and electrolysis dissolves molecular hydrogen (H₂) into the water before you drink it. Echo makes two: the 12 oz Echo Flask, independently lab-tested at 6.07 ppm on its 10-minute cycle and 8.25 ppm on its 20-minute cycle, and the 40 oz Echo Forty tumbler, launching early 2027.
How a hydrogen water bottle works
A hydrogen water bottle has a small electrolysis cell in its base. When a cycle runs, the cell splits water into hydrogen and oxygen. In a PEM (proton exchange membrane) design, also called SPE (solid polymer electrolyte), a membrane separates the two sides of the cell so the hydrogen goes into your drinking water and the oxygen side is kept apart. Echo bottles use PEM cells.
The amount of dissolved hydrogen is measured in parts per million (ppm), which for water is the same as milligrams per liter (mg/L). Some brands list parts per billion (ppb) instead: 1 ppm equals 1,000 ppb, so "6,000 ppb" and "6 ppm" are the same figure.
Compare Echo hydrogen water bottles
| Echo Flask | Echo Forty | |
|---|---|---|
| Capacity | 12 oz (350 mL) | 40 oz (1.18 L) |
| Dissolved hydrogen | 6 ppm (10-minute cycle), 8 ppm (20-minute cycle) | 4–6 ppm |
| Independent lab test | H2 Analytics report H2AR-250116-1: 6.07 ppm (10 min) and 8.25 ppm (20 min), by gas chromatography | Not yet published |
| Cell | PEM/SPE | PEM with platinum-coated titanium electrodes |
| Pressure | About 40 PSI at 6 ppm and 60 PSI at 8 ppm; a purge valve in the lid caps it at 60 PSI | Not published |
| Battery and charging | Built-in lithium-ion battery, USB-C, up to 7 cycles per charge | USB charging, about 120–160 minutes |
| Display and app | Touch-screen LCD; app tracks hydrogen and water intake | Touch-screen; app tracks hydrogen and water intake |
| Size and weight | 10 × 3 × 2 in; 1 lb empty, 1.8 lb full | 11 in tall, 4.1 in bottle diameter; 3.5 lb empty, 6 lb full |
| Body | Portable bottle | Double-walled stainless steel tumbler with straw lid (8 lid orientations) |
| Coverage | 60-day money-back guarantee; 5-year warranty | 60-day money-back guarantee; 5-year warranty |
| Availability | In stock | Launching early 2027; join the waitlist |
Which hydrogen water bottle is right for you?
- The highest concentration in a bottle you can carry: the Echo Flask, with an 8 ppm 20-minute cycle and a published third-party test report.
- A full day's water in one fill: the Echo Forty holds 40 oz at 4–6 ppm. It ships in early 2027; join the waitlist on its page.
- Hydrogen water at home as well: pair a bottle with a countertop or under-sink hydrogen water machine.
Comparing brands? Our guide to choosing the best hydrogen water bottle covers how ppm is measured, what PEM/SPE means, the specs to check and the red flags to avoid.
Hydrogen water bottle FAQ
How long does hydrogen stay in the water?
Hydrogen is a very small, light gas, so it starts to escape as soon as the bottle is opened. Drink it soon after the cycle finishes. With the Echo Flask lid closed, the concentration drops by only about 0.1 ppm a day; once it's open, the hydrogen escapes much faster, the way a soda goes flat.
What does "lab-tested" mean for a hydrogen water bottle?
Look for a report from an independent lab that names the bottle, the cycle, the test water and the measurement method. The Echo Flask report from H2 Analytics used distilled water and gas chromatography (static headspace analysis), three tests per cycle. Read the Echo Flask report (PDF).
Why does the Flask build pressure?
The hydrogen made during a cycle stays inside the sealed bottle, which raises the pressure and helps more of it dissolve. On the Echo Flask, pressure reaches about 40 PSI on the 6 ppm cycle and 60 PSI on the 8 ppm cycle, and a purge valve in the lid keeps it from going higher.
How do I charge an Echo Flask?
With the included USB-C cable and charging block. A full charge runs up to 7 cycles.
Is the Echo Flask HSA/FSA eligible?
The Echo Flask and Echo Forty are both in Echo's FSA/HSA eligible collection.